Filter plates play a large role in the work of Plate and Frame Filter Press. The quality of the filter plate also has a great impact on the effectiveness of the plate and frame filter press. When selecting a filter plate, you must know how to judge the quality of the plate and frame filter press. Filter Press Manufacturers Tell you in detail the method of judging the quality of the filter plate of the plate and frame filter press.
We first need to see if the entire filter plate is complete and the surface is smooth without any breaks or defects, especially the edge part of the filter plate of the plate and frame filter, which must be very flat and smooth because it plays the role of plate and frame The most important part of the filter chamber seal must not have any problems. If the filter room of the filter press cannot meet even the most basic conditions, the filter press will not be able to work. In the recessed part of the filter plate, minimize any silk scars, because the internal pressure of the filter press is very high during the work. In future use, the filter plate will often be under strong pressure from the filter silk scars.
Plate and Frame Filter Press
When a good filter plate is touched, no dust can be brought out. The vinyl will form a thin layer on the surface of the filter plate, which will look like jade, but it will be much less. This point can only be grasped well by years of experience.
The filter plate of the plate and frame filter press does not have any pungent or strong odor. It can only have a slight polyethylene odor. As long as you do not pay attention, you will not smell it. If the filter plate of the filter press has strong gas when it has not been used, it means that the filter press has added too many additives during the manufacturing process. board.
The above is a detailed introduction to the method of judging the quality of filter plates for plate and frame filter presses. If you want to choose high-quality filter plates for plate and frame filter presses, then it is necessary to master these methods.
The plate and frame filter press sometimes encounters a situation where it cannot be sealed, so why does this happen? Below we summarize a few points:
1. Lack of stress.
The filter plate and filter cloth of the plate and frame filter press will form a closed filter room structure under strong pressure, but the pressure is lacking. When the pressure of the filter plate is less than the pressure of the filtered liquid, the filtered liquid may leak out.
2. The filter plate is deformed or damaged.
The edge of the filter plate is damaged, raised, or is often worn out. It is also in contact with other filter plates. No matter what the pressure is, the formed filter room will also be saturated.
Our company also has Automatic Filter Press for Sale, welcome to consult.